04-12-2023, 12:18 AM
(This post was last modified: 04-12-2023, 12:52 AM by Steve Bryant.)
Thanks for the links Chris, I've already studied both of those in detail but they didn't really tell what I wanted to know.
Cheers,
STEPHEN
I think I may have discovered part of the problem. The dimensions given for the mold to form the leather cups in is about 1/16" too small in diameter and the depth should be increased by about the same amount when comparing the one original cup to the ones the mold produced. I will make two new ones and to these larger dimensions and see how that goes.
The issue of lubrication is still something I want to find out about.
Cheers,
Stephen
Cheers,
STEPHEN
I think I may have discovered part of the problem. The dimensions given for the mold to form the leather cups in is about 1/16" too small in diameter and the depth should be increased by about the same amount when comparing the one original cup to the ones the mold produced. I will make two new ones and to these larger dimensions and see how that goes.
The issue of lubrication is still something I want to find out about.
Cheers,
Stephen