17-11-2023, 04:07 PM
Hi Stephen
The ammeter is attached via small set screws that go down through the main hexagonal connectors on the back of the panel.
You should just be able to see the slotted head of screw in this photo.
Hope this helps
HowardÂ
IMG_0842.jpeg (Size: 146.17 KB / Downloads: 615)
The ammeter is attached via small set screws that go down through the main hexagonal connectors on the back of the panel.
You should just be able to see the slotted head of screw in this photo.
Hope this helps
HowardÂ
IMG_0842.jpeg (Size: 146.17 KB / Downloads: 615)