13-11-2023, 10:41 PM
I must admit that my experience of Seven crankshaft bearings mainly comes from the days some 40 years ago, when original type bearings were easily available. The last rear main
I fitted was to my present car almost 5 years ago, when the original Ransome and Marley’s bearing was replaced by an uncaged Hoffmann equivalent. That bearing has now done 21000 miles and is still going strong, although it has become a bit ‘rumbly’ as of late.
I fitted was to my present car almost 5 years ago, when the original Ransome and Marley’s bearing was replaced by an uncaged Hoffmann equivalent. That bearing has now done 21000 miles and is still going strong, although it has become a bit ‘rumbly’ as of late.