28-09-2023, 09:58 PM
First suggestion is output from ignition switch (same as supply side of coil), but if using old fashioned filament lamps this may be unwise because you will add 6 amps to the load on the switch and wiring for which it was not designed. If using LEDs this should not be a problem. If you plan to have hazard lights included they must not require the ignition switch to be 'on' because they must be operable when everything else is 'off'. Also filament bulbs will require 12 amps in hazard operation. We really need to know your whole plan before giving you a definitive answer. If you plan an LED system Dynamo Regulator Conversions can supply everything and their good advice is usually free.