27-09-2023, 03:15 AM
Hi all.
On the back vertical panel frame assembly's outside pieces, there is a recessed edge 3/32" deep on the edge facing forward from the top of the piece to the bottom. According to the instructions that John Heath wrote for this van kit, the outside of the van is to be clad in 18G Aluminum, so I am wondering if this recess is for the aluminum to be fitted to?
SIDE VIEW OF FRAME MOCK UP.jpg (Size: 94.92 KB / Downloads: 337)
EDGE QUESTION 2.jpg (Size: 80.3 KB / Downloads: 335)
Can anyone confirm this assumption?
Thanks,
Stephen
On the back vertical panel frame assembly's outside pieces, there is a recessed edge 3/32" deep on the edge facing forward from the top of the piece to the bottom. According to the instructions that John Heath wrote for this van kit, the outside of the van is to be clad in 18G Aluminum, so I am wondering if this recess is for the aluminum to be fitted to?
SIDE VIEW OF FRAME MOCK UP.jpg (Size: 94.92 KB / Downloads: 337)
EDGE QUESTION 2.jpg (Size: 80.3 KB / Downloads: 335)
Can anyone confirm this assumption?
Thanks,
Stephen