05-09-2023, 12:15 AM
(This post was last modified: 05-09-2023, 12:17 AM by Tony Press.)
Hi Dennis,
The FAG Bearing MS12 is a deep groove ball bearing equivalent to an SKF RMS 10 - with a 1 1/4" bore- it is not an Austin 7 Rear Main Bearing.
The Hoffman RMS 12 is a roller bearing equivalent to an SKF CRM 10 with a 1 1/4" bore and is an Austin 7 Rear Main Bearing.
If still clean and not showing any corrosion it should be alright to use.
The SKF Bearing is an angular contact ball bearing but I cannot find the SKF number CFM 10. If the bore is 1 1/8" x 2 13/16" od x 13/16" wide it could be a half the two front crankshaft bearings.
Cheers Tony
The FAG Bearing MS12 is a deep groove ball bearing equivalent to an SKF RMS 10 - with a 1 1/4" bore- it is not an Austin 7 Rear Main Bearing.
The Hoffman RMS 12 is a roller bearing equivalent to an SKF CRM 10 with a 1 1/4" bore and is an Austin 7 Rear Main Bearing.
If still clean and not showing any corrosion it should be alright to use.
The SKF Bearing is an angular contact ball bearing but I cannot find the SKF number CFM 10. If the bore is 1 1/8" x 2 13/16" od x 13/16" wide it could be a half the two front crankshaft bearings.
Cheers Tony