27-04-2018, 12:32 PM
I've just noticed David's comments about play in the spindle on his Accuspark unit. I posted previously on another thread about electronic distributors concerning a similar problem with then first one I bought - the crimping which attached the cam to the spindle had failed allowing the unit to retard i8tself when running. Accuspark replaced it and I've had no problems since.
However, a friend had a similar fault with his new one from Powerspark, which again was replaced and is now running fine, so there would appear to be a weakness here. Has anyone else had similar problems?
I would still recommend them, but like Ruairidh, I always carry the original just in case...
Alastair
However, a friend had a similar fault with his new one from Powerspark, which again was replaced and is now running fine, so there would appear to be a weakness here. Has anyone else had similar problems?
I would still recommend them, but like Ruairidh, I always carry the original just in case...
Alastair