13-08-2023, 01:19 PM
Hi
Before you do too much cleaning or dismantling I would mark the position of the screw in torque tube and the side adjusters (that lurk under plates under the goo either side of the banjo). That way if you disturb anything you have a chance of returning things to as they were. If not it’s a full axle out and back axle set up!
Cheers
Howard
PS You can safely take the plate off the back of the banjo which will give you a good way of assessing the goo inside and the condition of the crown wheel.
Before you do too much cleaning or dismantling I would mark the position of the screw in torque tube and the side adjusters (that lurk under plates under the goo either side of the banjo). That way if you disturb anything you have a chance of returning things to as they were. If not it’s a full axle out and back axle set up!
Cheers
Howard
PS You can safely take the plate off the back of the banjo which will give you a good way of assessing the goo inside and the condition of the crown wheel.