02-08-2023, 01:05 PM
(31-07-2023, 05:55 PM)AustinWood Wrote: We get no interference with our 6V LED lights. I put this down to using armoured cable on the headlights which acts as an interference screen, and also earthing everything back to a central earth block under the dashboard.
My car (with armoured cable to the headlights) and a 6-volt LED flaster set up, has a dynamo that only charges on the summer setting. With the dynamo not charging, the flashers worked perfectly. Switch the dynamo on and they didn't. The other chummy is identical in set-up (i.e. a dynamo with just the summer charge) but on that, the LED flashers work perfectly. There wasn't even a need to install suppressors on the ignition system. So, what's going on!