(28-08-2017, 07:37 PM)Timothy P Wrote: Hello Clive,
Hope you don't mind, I've moved your thread out of the management info box, and hopefully it will get some more responses here.
For your questions, these parts lists may be useful to identify the parts on your car? Which year (if any) shows your parts?
1934
1937
1938
If none, then it sounds like they may have been modified (or are quite a bit earlier than expected), and pictures would help to identify (they would be helpful anyway to make sure we're all on the same page, when answering your questions)
With regards Trevor Sharp's article, this was about the 'Big Seven', and the mod advised for the rollers and cones would only apply to a regular 7 if you have a 1938 onward, rod braked back axle. All previous types, the shoes are expanded by rotating cam.
Hope that is of some help. (or leads to more help)
MANY THANKS TIMOTHY THE PARTS IN QUESTION ARE FROM THE 1937 LIST P46 AND ARE 1A5487. 1A5472. & 1A5471 THE QUESTION BEING. DOES PART 1A5471 PIVOT ON 1A5487 OR IS IT FIXED RIGID ? AS MINE IS AT THE MOMENT. I HAVE LOOKED AT PREVOUS THREADS BUT CAN FIND NO MENTION AS TO WEATHER SHOULD MOVE OR IS RIGID AS TO THE BRAKES I THINK THEY MUST BE POST 38 AS THEY HAVE ROLLERS. THE WHOLE CHASSIS APPEARS TO BE A BITSA REGISTERED AS A 34 ALTHOUGH THERE ARE NO IDENTIFICATION NO'S EXCEPT ON THE DIFF WHICH IS STAMPED AS A 37 AND THE V5 REGISTRATION DOC