27-06-2023, 08:57 AM
(This post was last modified: 27-06-2023, 09:06 AM by Howard Wright.)
Hi Matt
It depends how much rake you need on the column, but on my special I ground down the heel of the box casting and inserted a small wedge at the toe. It got a good few degrees without altering the position of the pedal pin.
The best option is one of David Cochrane’s pukka steering boxes. BM24r on the A7 Components web site.
Cheers
Howard
Hi Matt
Just found a photo
Howard
IMG_0898.jpeg (Size: 78.1 KB / Downloads: 274)
It depends how much rake you need on the column, but on my special I ground down the heel of the box casting and inserted a small wedge at the toe. It got a good few degrees without altering the position of the pedal pin.
The best option is one of David Cochrane’s pukka steering boxes. BM24r on the A7 Components web site.
Cheers
Howard
Hi Matt
Just found a photo
Howard
IMG_0898.jpeg (Size: 78.1 KB / Downloads: 274)