09-06-2023, 04:58 PM
Just to update this, I tried the booster pack but it didn't like it as the 'battery' voltage was too low (in other words zero) and it requires a minimum voltage. I'll go down the small 12v battery route I think, although a more immediate issue is that there is a bolt producing out the bulkhead where the starter motor should be so I need to relocate that somehow.
I found a spare locating dowel in an old crankcase I have. I hadn't realised they were stepped so potentially not all that straightforward to replicate accurately. I need another one for another project - do any of the suppliers stock them?
I found a spare locating dowel in an old crankcase I have. I hadn't realised they were stepped so potentially not all that straightforward to replicate accurately. I need another one for another project - do any of the suppliers stock them?