20-05-2023, 01:40 PM
This morning I disconnected the earth wires from both the headlamp bulb holders (the other ends of the wire are soldered to the body of the lamp) and ran wires from both directly back to the battery.
However, the brake/indicator on/off issue is still there. Any suggestions on where to go next? Do I have to try direct earthing allĀ four indicators and the brake lights? I should say there is no issue when using normal incandescent headlamp bulbs.
However, the brake/indicator on/off issue is still there. Any suggestions on where to go next? Do I have to try direct earthing allĀ four indicators and the brake lights? I should say there is no issue when using normal incandescent headlamp bulbs.