6 psi at idle when warmed up would lead to the beginnings of slight concern at blocked jets, engines have shown 10/12 when fired up then about 2 when ticking over after getting the oil hot. The mag engine has shown 2/3 when cold, down to the pin almost immediately. The dawn chorus this morning had the birds singing loudly in Welsh. At one point I thought I heard them calling out, dipstick, dipstick. I only have one magneto engine dipstick so nothing to compare it with. Any comments?
|
Pressure relief ball
|
 6 psi at idle when warmed up would lead to the beginnings of slight concern at blocked jets, engines have shown 10/12 when fired up then about 2 when ticking over after getting the oil hot. The mag engine has shown 2/3 when cold, down to the pin almost immediately. The dawn chorus this morning had the birds singing loudly in Welsh. At one point I thought I heard them calling out, dipstick, dipstick. I only have one magneto engine dipstick so nothing to compare it with. Any comments? |
|
« Next Oldest | Next Newest »
|
Users browsing this thread: 2 Guest(s)