02-05-2023, 10:44 AM
(This post was last modified: 02-05-2023, 10:48 AM by Denis Sweeney.)
John C, garage has been OOB for the weekend but just put the meter across the terminals and registered 6.3 bolts, tried the starter motor and the reading dropped to just 2 volts. I am putting this back to yourself and others as electrics are a bit of a dark art to me, is that good or tragic??
I did also check the reading at the ends if the cables at the connection to the engine and starter switch and that is the same as the reading across the terminals, 6.3 volts.
I did also check the reading at the ends if the cables at the connection to the engine and starter switch and that is the same as the reading across the terminals, 6.3 volts.