28-08-2017, 09:31 PM
(28-08-2017, 09:01 PM)Ruairidh Dunford Wrote: I have done this many times, resetting side adjustment is normal (prudent if you are replacing the side bearings) and not complicated. Often the outer race of the thrust bearing can remain fast in the axle tube - I notice the nearside bearing has already come apart, is the outer race of that jammed in the tube?
If you are unsure or (now unnecessarily) worried about any of this Ian, you are very welcome to ring me on 01419428037 and I can explain exactly how I do it.
No mention of the axle shaft nut being undone at the other side and the hub being pulled off the taper, sorry if Missed something and stating the obvious