15-04-2023, 03:59 AM
(This post was last modified: 15-04-2023, 04:02 AM by Tony Press.)
(14-04-2023, 09:56 PM)Chris Garner Wrote:(14-04-2023, 09:31 PM)Ruairidh Dunford Wrote: Did you check the vanes were the correct orientation?
The oil should read over 20psi when cold.
Good point. " Sharp Tops with Rounded Bottom " !
A suggested by Ruairidh
:
Much better point " Sharp Bottoms with Rounded Top"
Otherwise disaster