10-04-2023, 09:55 AM
Very helpful thank you. Yes Austin, the torque tube adjuster is good and the silentblock bush and bolt are both new. There is some wear in the holes in the mounting plates and I'm at a loss to know how to rectify this in situ, however the through-bolt is tight and doesn't show any signs of having moved.
I will investigate the spring rivet possibility, thanks Reckers.
No bumpers on mine Graham but I understand the principle - it could be something quite unrelated to suspension! I've done the obvious thing of emptying the boot and removing the back seat.
The only thing I haven't worked on in recent years is the friction dampers but the noise sounds heavier than that.
I will investigate the spring rivet possibility, thanks Reckers.
No bumpers on mine Graham but I understand the principle - it could be something quite unrelated to suspension! I've done the obvious thing of emptying the boot and removing the back seat.
The only thing I haven't worked on in recent years is the friction dampers but the noise sounds heavier than that.