05-04-2023, 08:55 AM
(05-04-2023, 08:20 AM)SlackĀ Alice Wrote: Looks like mine on a good day.
One thing you MUST do - run round all the block holding down nuts with a spanner - they can come loose.
Front and rear are a pig to get at, but if there is any sign of the three each side being tightenable (!), then attention is desirable.
Short spanner - they mustn't be over tightened, or you will pull the stud out of the crankcase and the engine will have to come out.
I heartily endorse Simon's advice.
Here's what happens when you over-tighten:
1s.jpg (Size: 445.07 KB / Downloads: 280)
2.jpg (Size: 376.94 KB / Downloads: 282)