Dynamator refurbishment

[Stuart Giles]

Testing at this point revealed that the rotor winding was open circuit (was this the same Dynamator that Stuart had a go at?). Oh poo.

Well done for finding and fixing the faulty rotor. Happy to confirm that all the left over Dynamator bits from the repair that I did are still lingering in my workshop somewhere  

It looks like the Dynamator I repaired using the rotor from a donated 'dead' unit has failed again, and I hope to have the unit back here in the workshop over the  next week or two. I will have a look to see if it's the rotor I replaced that has failed or whether it is some other fault this time. The other components are fairly generic so should be fixable if the regulator or such has let out the magic smoke.