28-08-2017, 05:56 PM
(28-08-2017, 04:35 PM)Stuart Giles Wrote: The pins have the differential planet wheels on them -3 on each side of the diff. The halfshafts have the sun wheel as part of the end of the halfshaft -that's why they won't simply slide out. So you need to pull the whole diff unit out of the case with both halfshafts still in place, then undo the 6 nuts that are on the other end of those 6 bolts and the differential can be split into 2 halves (make sure there is a mark on the diff perimeter to allow you to "clock" the halves back in the same place). Then you can slide out the halfshafts across the inside of the diff.
Ok follow that ,it just seems the shaft and attached differential is very solidly attached
And is reluctant to move. Any tips for pulling it out without doing damage?