09-02-2023, 10:05 PM
(This post was last modified: 10-02-2023, 01:46 AM by Tony Press.)
"Now I add a single shot of grease once a year or so in the understanding that when squeezed through the grease hole it has little chance of reaching the bearing anyway."
Do not add any grease after assembly- as noted sealed bearings are best - and no need to get grease on your hands
Always use the felt seal plate and if you want to keep it looking original keep the felt seal.
Do not add any grease after assembly- as noted sealed bearings are best - and no need to get grease on your hands
Always use the felt seal plate and if you want to keep it looking original keep the felt seal.