06-02-2023, 11:41 AM
Dave, three things you can do to make this easier. Firstly, buy yourself a 100ml plastic syringe with a filler tube on the Bay of E from Mr Woo's emporium.
Secondly sit your 140 grade oil in a pan of boiling water before adding - it will become much easier to pour/inject when it's hot.
Lastly, rotate the diff internals so you can get the tube for the syringe past the crown wheel.
After use, give the syringe a good clean so the oil doesn't rot the rubber seal.
Secondly sit your 140 grade oil in a pan of boiling water before adding - it will become much easier to pour/inject when it's hot.
Lastly, rotate the diff internals so you can get the tube for the syringe past the crown wheel.
After use, give the syringe a good clean so the oil doesn't rot the rubber seal.