30-01-2023, 09:40 AM
I wouldn't bother trying to rescue that one.
If it were me I would make up a rigid former the size of the wing and laminate new strips around it. It is very wasteful on wood (cutting into thin strips) but you'll end up with a piece that stays exactly the right shape. Turn every other piece upside down to eliminate any natural warping of the grain. Hold it all together with ratchet straps while it dries.
If it were me I would make up a rigid former the size of the wing and laminate new strips around it. It is very wasteful on wood (cutting into thin strips) but you'll end up with a piece that stays exactly the right shape. Turn every other piece upside down to eliminate any natural warping of the grain. Hold it all together with ratchet straps while it dries.