10-04-2018, 01:53 PM
(This post was last modified: 10-04-2018, 01:54 PM by Ruairidh Dunford.)
(10-04-2018, 01:18 PM)Zetomagneto Wrote:(10-04-2018, 09:50 AM)Ruairidh Dunford Wrote: Drill and tap for two cap screw either side of the existing hole. This can be done without removing the engine, if sufficient body dexterity exists.
Drill and tap into what, there is jus a big broken hole
I can, and have, repaired similar using two cap screws into the remaining metal on several engines Gene. If you feel it is not possible you should consider alternatives, if you find yourself in a similar situation.