27-08-2017, 09:35 PM
Hi James,
Regarding the SU, I would be inclined to fit a Filter Sox they are made to fit over Flared ram tubes.
My reasons for this are.
( ONE) they keep the dust out
( TWO ) they reduce the Vacuum caused by having the intake of the carburettor at Right angles to the Air
Flow a long the side of the car.
In the early 70s F5000 and Canam cars had the rams vertical and would not produce the same Hp in the
car as on the Engine Dyno were the air was still hence the intakes above the drivers head now.
feel Free to disregard if you think its B/S
Cheers Colin
Regarding the SU, I would be inclined to fit a Filter Sox they are made to fit over Flared ram tubes.
My reasons for this are.
( ONE) they keep the dust out
( TWO ) they reduce the Vacuum caused by having the intake of the carburettor at Right angles to the Air
Flow a long the side of the car.
In the early 70s F5000 and Canam cars had the rams vertical and would not produce the same Hp in the
car as on the Engine Dyno were the air was still hence the intakes above the drivers head now.
feel Free to disregard if you think its B/S
Cheers Colin