29-12-2022, 02:53 PM
Have you tried welding the puller onto the hub?
It does work, when all else has failed.
Get a good strong weld around it. Do the centre bolt up really tight and then hit that with the sledge hammer.
An outer hub is easily replaced, as is the puller (although I always cut mine back off and reface it for the next time).
It does work, when all else has failed.
Get a good strong weld around it. Do the centre bolt up really tight and then hit that with the sledge hammer.
An outer hub is easily replaced, as is the puller (although I always cut mine back off and reface it for the next time).