29-12-2022, 02:45 PM
Hi All
i have now tried all of the above and no joy.
I was quite cuffed that i got a really good hit with a sledge, it rang like a church bell, but no joy :-(
i have tried heat and the same again, it is solid.
When i originally took off the drive shaft nut, it wasn't tight, which raised a few alarm bells in my mind.
i have a feeling that the key has rolled and fused the hub and shaft together.
I guess the only option left is to break out the angle grinder and order a new hub and driveshaft :-(
This is turning into one very expensive brake rebuild !!!
i have now tried all of the above and no joy.
I was quite cuffed that i got a really good hit with a sledge, it rang like a church bell, but no joy :-(
i have tried heat and the same again, it is solid.
When i originally took off the drive shaft nut, it wasn't tight, which raised a few alarm bells in my mind.
i have a feeling that the key has rolled and fused the hub and shaft together.
I guess the only option left is to break out the angle grinder and order a new hub and driveshaft :-(
This is turning into one very expensive brake rebuild !!!