24-12-2022, 05:10 PM
(This post was last modified: 24-12-2022, 06:02 PM by Daisy Dunford.)
I think this will be my last post of the year as dad needs the workshop space back for his proper job.
We worked really hard over the last two days because we need to be able to move the car about.
The back brakes were a lot of work because the hole for the cam was too small and dad had to make it bigger, that took quiet a long time but at last he got it right and we could put the brakes on.
We then put all the cables on and the handbrake and at last the steering column.
Dad lifted the engine in and we put on a differnt geabox and the axle shaft
I put the exhaust pipe on too.
It was nearly ready to start up again and I was very excited.
https://youtube.com/shorts/YMDUXNhr_Os?feature=share
https://youtube.com/shorts/a80pCz8eDGk?feature=share
https://youtube.com/shorts/mk1APmwI7m4?feature=share
We worked really hard over the last two days because we need to be able to move the car about.
The back brakes were a lot of work because the hole for the cam was too small and dad had to make it bigger, that took quiet a long time but at last he got it right and we could put the brakes on.
We then put all the cables on and the handbrake and at last the steering column.
Dad lifted the engine in and we put on a differnt geabox and the axle shaft
I put the exhaust pipe on too.
It was nearly ready to start up again and I was very excited.
https://youtube.com/shorts/YMDUXNhr_Os?feature=share
https://youtube.com/shorts/a80pCz8eDGk?feature=share
https://youtube.com/shorts/mk1APmwI7m4?feature=share