24-11-2022, 09:55 PM
(This post was last modified: 24-11-2022, 09:57 PM by David Stepney.)
I had some difficulty when I first fitted flashing indicators to the RP. The electronic 6v flasher that I got off flashed at a prodigious rate and was very voltage sensitive. I eventually got a flasher unit from Paul Beck. It wasn’t cheap, at about £17 including postage and packing, but it cured the problem. It flashes at about 90 beats a minute and doesn’t vary with the voltage.
I should perhaps point out that I am using incandescent bulbs rather than LEDs. LEDs seem to be a lot of bother judging by these annals.
I should perhaps point out that I am using incandescent bulbs rather than LEDs. LEDs seem to be a lot of bother judging by these annals.