10-11-2022, 07:41 PM
(This post was last modified: 10-11-2022, 07:59 PM by pendragon374.)
Thanks to you all for responding. I have had another attempt this evening with the new information. I set everything to just before TDC and inserted the dist to just about to open on number 1 lead and nothing. So I lifted up the dist and moved it one tooth at a time before eventually the car started but was back firing and very revved up. I continued to move teeth before it would not start and I moved the dist one tooth at a time again before it started but same as before. At one point when it was at high revs I turned the ignition off to stop the car and it carried on running causing me to pull the coil plug lead to stop the car. At a bit of a loss now.
May I ask. Are any of the forum members who are in the know near to Lytham , Lancashire who might be able to call around and give me some assistance/advice ? John
May I ask. Are any of the forum members who are in the know near to Lytham , Lancashire who might be able to call around and give me some assistance/advice ? John