08-11-2022, 10:27 AM
John,
if it helps settle your mind, I have always used a plain nut and spring washer in this application. I have encountered no issues whatsoever in doing this for the last 30 years on many hundreds of cars.
The thread on the spring shackles is normally 3/8 BSF
Hope this helps,
Ruairidh
if it helps settle your mind, I have always used a plain nut and spring washer in this application. I have encountered no issues whatsoever in doing this for the last 30 years on many hundreds of cars.
The thread on the spring shackles is normally 3/8 BSF
Hope this helps,
Ruairidh