04-04-2018, 04:21 PM
The axle even needed twisting to get it all correct Dennis.
Using a modified domestic tap valve face cutter gets away with fannying about with grinding paste. Gets it flatter too.
That said, Ive driven a few cars where the king pins were atrocious and never had the problem I describe.
I will report back once I've had another look.
Using a modified domestic tap valve face cutter gets away with fannying about with grinding paste. Gets it flatter too.
That said, Ive driven a few cars where the king pins were atrocious and never had the problem I describe.
I will report back once I've had another look.