25-09-2022, 08:38 PM
I am interested to know more about your experiences with POR 15 Reckers, especially as you have recommended it on other threads so must have used it for a while. A number years ago there was some quite aggressive marketing for the stuff so I decided to try it on a few component's. To be honest my results were not great so I did not bother again, I must admit it flowed out very well giving a very nice finish, my issue was that rust very quickly spread like a cobweb beneath the paint. These were components that were previously rusted but had been mechanically cleaned as far as possible and then treated with a rust converter before painting. I have never had this happen to the extent it did under POR 15, I put it down to the paint being moisture cured and went back to using what works for me. There may be some critical process that I missed or got wrong and which is worth repeating here so other's don't fall into the trap I did.
Black Art Enthusiast