23-09-2022, 07:25 AM
Hi Erich
From your description it sounds like this is the clamping bolt that locks the column into the box. The column should twist to screw in or out of the box altering the pre load on the worm gear. From memory it’s a 1/4 BSF bolt that screws into the threaded portion of the hole.
Cheers
Howard
From your description it sounds like this is the clamping bolt that locks the column into the box. The column should twist to screw in or out of the box altering the pre load on the worm gear. From memory it’s a 1/4 BSF bolt that screws into the threaded portion of the hole.
Cheers
Howard