All Alloy Cup progress

[AllAlloyCup]

Despite the cold weather I’m making steady progress on the coachwork
And wings on the AllAlloyCup

Front wings nearly complete with some adjustment needed on the front of one wing.
Rear wing method proved and hopefully both will be fitted in the next 2 or 3 weeks.

Then it’s only the tail cover to make, easily the hardest part for a beginner like me.

Will attempt to make it in two halves this time. As the one sheet method
Gave a result good enough for covering with fabric but not nice enough to be bare alloy
Which is the Achilles heel of this project.

It will be good to get onto mechanical and electric fitting soon!

Regards

Bill G
Aka AllAlloyCup


  9529FA95-1372-48F8-91C7-0529E30F5341.jpeg (Size: 106.86 KB / Downloads: 231)
  9529FA95-1372-48F8-91C7-0529E30F5341.jpeg (Size: 106.86 KB / Downloads: 231) [attachment=2508]
  98970886-1A1F-4B86-BE1E-37ED7C376B3E.jpeg (Size: 46.58 KB / Downloads: 232)