The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.31 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
gearbox selector forks
#3
To reduce side clearance of the forks gently squeeze the sides of the forks in a vice, the amount of rock dosn't make any difference, gear rattle is caused by either excessive tooth clearance or to much end float on the layshaft. Layshaft end float can be set by shims behind the front bush, cleanup the face of the bush and front layshaft support plate, assemble in box no gasket on shaft rear.#, check measure clearance front bush to plate. I set zero clearance free rotation see attachment for bush removel. Use gear oil  75/90 GL4 suitable for 3 or 4spd boxes.        
Reply


Messages In This Thread
gearbox selector forks - by Peter Naulls - 17-08-2022, 09:55 PM
RE: gearbox selector forks - by A G Wood - 18-08-2022, 12:03 AM
RE: gearbox selector forks - by Terrytuned - 18-08-2022, 10:52 AM
RE: gearbox selector forks - by Peter Naulls - 18-08-2022, 08:19 PM
RE: gearbox selector forks - by JonE - 18-08-2022, 09:17 PM
RE: gearbox selector forks - by Peter Naulls - 19-08-2022, 07:55 AM
RE: gearbox selector forks - by Terrytuned - 19-08-2022, 09:45 AM
RE: gearbox selector forks - by Peter Naulls - 19-08-2022, 09:21 PM
RE: gearbox selector forks - by Terrytuned - 20-08-2022, 11:28 AM
RE: gearbox selector forks - by JonE - 25-08-2022, 10:05 AM
RE: gearbox selector forks - by A G Wood - 25-08-2022, 10:38 AM

Forum Jump:


Users browsing this thread: 2 Guest(s)