11-08-2022, 08:17 AM
(This post was last modified: 11-08-2022, 08:22 AM by Gordon england brooklands.)
Hi Charles , thanks for the reply . The 42 g float gives level just below 3mm . The 47 g is 1 mm lower than rim of main jet mount , without the flooding problem . With the 47g float the motor runs OK but won’t start without a Spray of Aero start . The motor won’t idle below 1100 rpm , the motor is fitted with a Dante aluminium head a moderate camshaft , 28mm inlet valves and Phoenix pressurised c/shaft and con rods and J P pistons
Charles , The motor has been built and running well until the new needle valve was replaced starting was not easy but now it won’t start without aero start
Charles , The motor has been built and running well until the new needle valve was replaced starting was not easy but now it won’t start without aero start