01-08-2022, 07:33 PM
I have just bought a 1929 Chummy and this whole area is new to me!
I have a problem with the starter motor foot button next to the clutch pedal. It is stuck and does not press down. I have released the three screws on the cover plate, but the switch does not appear to want to come out of the housing. Do I need to remove the two parts to the starter motor and the button at the same time or should the button come out on its own? The main live connection from the battery is attached to the button with no exposed terminal.
Photo:
file:///C:/Users/stephen/Documents/1.%20Steve/Austin%207/Starter%20button/Starter%20button%20minus%20covers.jpg
file:///C:/Users/stephen/Documents/1.%20Steve/Austin%207/Starter%20button/Starter%20button.jpg
Please can some someone advise a step by step approach.
Many thanks
Steve
I have a problem with the starter motor foot button next to the clutch pedal. It is stuck and does not press down. I have released the three screws on the cover plate, but the switch does not appear to want to come out of the housing. Do I need to remove the two parts to the starter motor and the button at the same time or should the button come out on its own? The main live connection from the battery is attached to the button with no exposed terminal.
Photo:
file:///C:/Users/stephen/Documents/1.%20Steve/Austin%207/Starter%20button/Starter%20button%20minus%20covers.jpg
file:///C:/Users/stephen/Documents/1.%20Steve/Austin%207/Starter%20button/Starter%20button.jpg
Please can some someone advise a step by step approach.
Many thanks
Steve