29-07-2022, 05:49 PM
Just one from experience.
Check the cam followers all drop down onto the camshaft.
Its not unknown for the taper locknut to be overtightened and split the cam follower which then jams in guide.
This makes a horrible noise causes a missfire and loses compression.
I have a few split ones in the junk pile.
Check the cam followers all drop down onto the camshaft.
Its not unknown for the taper locknut to be overtightened and split the cam follower which then jams in guide.
This makes a horrible noise causes a missfire and loses compression.
I have a few split ones in the junk pile.