25-07-2022, 09:19 PM
Hi
This thread from the old forum should be of interest:
http://pub25.bravenet.com/forum/static/s...6&cmd=show
From memory, the original fitment of the units is into a rectangular slot in the door pillar, accessed from inside the car by removing the metal trim piece. The trafficator itself is held by a screw and tab or 2 screws (can't remember detail). The single feed wire threads above the door and down the windscreen pillar, with earth return via the metalwork of the door pillar.
This thread from the old forum should be of interest:
http://pub25.bravenet.com/forum/static/s...6&cmd=show
From memory, the original fitment of the units is into a rectangular slot in the door pillar, accessed from inside the car by removing the metal trim piece. The trafficator itself is held by a screw and tab or 2 screws (can't remember detail). The single feed wire threads above the door and down the windscreen pillar, with earth return via the metalwork of the door pillar.