13-07-2022, 04:12 PM
well, I've used the same size... as that's all I had. The balls do appear to be sticking in the groove in the pictured section I was worried about, and the conical bit DOES seem to run on them. So I'll omit the brass thing.
The upper end ballrace is much smaller, but most importantly there is no possibility to get rid of end float like the PA, with the different internal structure. Whether it actually all goes together, I'll let you know.
The upper end ballrace is much smaller, but most importantly there is no possibility to get rid of end float like the PA, with the different internal structure. Whether it actually all goes together, I'll let you know.