10-07-2022, 10:04 PM
(09-07-2022, 06:55 PM)Tony Betts Wrote: ive been tinkering with the superports today.
... but back to a simular thing as yourself. on a tightish turn i can feel movement in the wheel as the bolt that pinches the wheel moves from one side of the cutout to the other.
if i temp fate and tighten it before morton, sods law says it will break. so ill risk it until after the event.
On my Chummy I fitted carefully shaped stainless steel shim in the base of the groove then wound the bolt in so that it was nice & tight. It's been OK for the past 40 years or so.
David