08-07-2022, 07:05 PM
Hello Andrew. I think I may have resolved the problem but I won't know for sure until later. The coil is O.K. It shows a primary resistance of 1.4 Ohms which is what it always has done. I think the reason for no HT spark is because of corrosion. When I removed the king lead from the coil it was all in a sorry state. I removed the coil and spent a while cleaning up the outlet and the HT contact area. I then tested it and found I could get a spark using my battery which I had charged up again. I have cleaned the points and checked all the connections.
After tea I will see if I can coax Trundles back into life.
After tea I will see if I can coax Trundles back into life.
![Wink Wink](https://www.austinsevenfriends.co.uk/forum/images/smilies/wink.png)