29-06-2022, 10:16 AM
So its a t type.
I guessed there would be no suck from the inlet, thats why its not pumping!. Amd why tje fuel in the pump backflowed into the tank.
Blow through that inlet. You should be able to blow, but not suck. If you can, the non return (the fibre disk on the brass seat) isnt sealing. Basically the pump cant make a vacum.
Rub the disk in a circular motiom on the brass seat with some mild abrasive. The 'Pink' kitchen cleaner is my current favourite.
I had an issue where the disk seemed to have distorted and wasnt flat, I swapped it for another from spares. There was a link posted at the time where to buy new ones.
Also Asembling them can be tricky, and sometimes the disk doesnt sit down in the proper spot and doesnt seal
I guessed there would be no suck from the inlet, thats why its not pumping!. Amd why tje fuel in the pump backflowed into the tank.
Blow through that inlet. You should be able to blow, but not suck. If you can, the non return (the fibre disk on the brass seat) isnt sealing. Basically the pump cant make a vacum.
Rub the disk in a circular motiom on the brass seat with some mild abrasive. The 'Pink' kitchen cleaner is my current favourite.
I had an issue where the disk seemed to have distorted and wasnt flat, I swapped it for another from spares. There was a link posted at the time where to buy new ones.
Also Asembling them can be tricky, and sometimes the disk doesnt sit down in the proper spot and doesnt seal