24-03-2018, 07:50 AM
(This post was last modified: 24-03-2018, 07:51 AM by Zetomagneto.
Edit Reason: More info
)
(24-03-2018, 04:09 AM)Erich Wrote: Hi All,
I apologize if this is a noodle head question. I've a got a supply of KLG spark plugs. I use knurled nuts and blade connectors for my ignition leads. The KLGs I have have some material on the lead end that prevents me from getting the blades tight on the plug with the knurled nuts. So I want to run a die down further so I can get them tight. I have read on the net that the thread is M4. Not on these KLGs. What is the thread size of these. 3BA seems to be close but perhaps not exact. Does anyone know?
Erich in still cold Seattle
Erich, put a spring washer between the plug, and terminal, it will take up the slack and help prevent the knurled nut from unscrewing.Becaus its under the terminal blade it wont be seen,in othe words spring washer not under the knurled nut.