Head bolt leak.

[Charles Levien]

When replacing head gaskets we use Loctite 5990 a silicone copper gasket sealant applied thinly to both sides works on race engines its stocked in Halfords.

This is brilliant stuff when applied as a thin coat. To save things getting messy I coated the crimped side first, fitted the gasket to block and then coated the top side of gasket. Everything needs to start very clean.
If your water seepage continues and you take the head off again this might be worth considering. You shouldn’t have any problem using the same gasket again but do remove any trace of grease.

Anyone with a good eye for design will see the flowing lines in the Swallow side car which naturally followed into the Swallow cars and subsequently into today’s Jaguar.
A process of organic design evolution — perhaps there’s a hint in the streamlined form of the bird that takes this name.   Or am I getting carried away here!

Not, I presume, by an African or European swallow.

Don’t know why this post has reappeared - must have touched the wrong button!