10-06-2022, 02:05 PM
(10-06-2022, 10:16 AM)Colin Wilks Wrote: When I first did this job I borrowed one like Dave's from a friend. The width of the forks is 1/2" and trying to get one for myself afterwards I struggled to find one, the standard offering having a 19mm gap which is too big. I now use a small two arm bearing puller, which does the job but is more fiddly.
I have the same issue with mine, but found that inserting an open ended spanner into the jaws from the opposite direction closed the gap nicely and allowed the puller to sit tight under the loosened castellated nut. The one I have is a sykes pikavant one much like this
https://www.ebay.co.uk/itm/275339183331?...SwKatinJRX