21-03-2018, 06:25 PM
John Barlow does block base shims in aluminium in two thicknesses if pistons are too high in the block
saves having to machine pistons.
Terry.
saves having to machine pistons.
Terry.
|
Valve reseating
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Valve reseating - by P J Quinn - 13-03-2018, 02:21 PM
RE: Valve reseating - by Chris KC - 13-03-2018, 03:08 PM
RE: Valve reseating - by Robert Leigh - 13-03-2018, 05:28 PM
RE: Valve reseating - by Thowdfella - 20-03-2018, 09:52 AM
RE: Valve reseating - by Jeff Taylor - 13-03-2018, 09:57 PM
RE: Valve reseating - by Derek Simmons - 20-03-2018, 12:35 PM
RE: Valve reseating - by Stuart Giles - 20-03-2018, 11:18 PM
RE: Valve reseating - by David.H - 21-03-2018, 09:35 AM
RE: Valve reseating - by Mike Costigan - 21-03-2018, 10:28 AM
RE: Valve reseating - by David.H - 21-03-2018, 11:44 AM
RE: Valve reseating - by Stuart Giles - 21-03-2018, 11:56 AM
RE: Valve reseating - by Ruairidh Dunford - 21-03-2018, 01:14 PM
RE: Valve reseating - by Stuart Giles - 21-03-2018, 03:11 PM
RE: Valve reseating - by Ruairidh Dunford - 21-03-2018, 03:35 PM
RE: Valve reseating - by Terrytuned - 21-03-2018, 06:25 PM
RE: Valve reseating - by Ruairidh Dunford - 21-03-2018, 06:32 PM
RE: Valve reseating - by Ian Dunford - 21-03-2018, 07:30 PM
RE: Valve reseating - by Ruairidh Dunford - 21-03-2018, 09:14 PM
RE: Valve reseating - by Colin Wilks - 29-03-2018, 06:28 PM
RE: Valve reseating - by Chris KC - 30-03-2018, 08:06 AM
RE: Valve reseating - by Colin Wilks - 30-03-2018, 02:49 PM
RE: Valve reseating - by Stuart Giles - 30-03-2018, 06:01 PM
RE: Valve reseating - by Colin Wilks - 30-03-2018, 06:34 PM
RE: Valve reseating - by Ian Williams - 31-03-2018, 05:09 AM
RE: Valve reseating - by Zetomagneto - 31-03-2018, 07:51 AM
RE: Valve reseating - by Ruairidh Dunford - 31-03-2018, 08:57 AM
RE: Valve reseating - by Colin Wilks - 02-04-2018, 05:59 PM
RE: Valve reseating - by Zetomagneto - 02-04-2018, 10:47 PM
|
Users browsing this thread: 13 Guest(s)