19-03-2018, 09:26 PM
Hi RR, ref the door hinge fitting and the door skin. I have checked on my 1932 RP and the skin is wrapped right around the timber frame and attached on the inside by the small tabs which are part of the skin (if that makes sense)
Where the hinges are positioned, the door skin flange is cut away at that point, leaving the original radius on the skin which avoids a sharp edge. This is a very small return, around 3m/m and does not affect the seating of the hinge.
Hope this helps.
Smiley.
Where the hinges are positioned, the door skin flange is cut away at that point, leaving the original radius on the skin which avoids a sharp edge. This is a very small return, around 3m/m and does not affect the seating of the hinge.
Hope this helps.
Smiley.